A BUILD BY 3D MIEKS / THE HOLIDAY EDIT
Everglow.
A little nostalgia.
A whole lot of glow.
A familiar Christmas light, with a little more presence. Three printed pieces, two simple twists, and a colour combination that feels like you.

The 3D preview is unavailable. You can still explore the build guide below.
A FAMILIAR SHAPE. A NEW HOLIDAY TRADITION.
A little nostalgia.
A bigger glow.
The oversized bulb sits on a fluted socket with its side clip built right in. The bulb is also the diffuser, hiding a removable LED carrier underneath.
Set it on a shelf, make it part of your mantel, or find a festive corner that needs a little colour.
Find your Christmas combination ↓01 / MIX A LITTLE MERRY
Your colours.
Your kind of Christmas.
Turn the real design around, pull the three parts apart, and find your favourite festive pairing.
LIVE 3D / THE THREE PRINTED PARTS

Your browser could not load the 3D model. The build guide and dimensions are available below.
Three pieces. One little holiday.
The clip comes with it.Printed as part of the base, keeping the silhouette and part count simple.
The bulb does both.The outer shape is also the diffuser. No extra sleeve to print.
Two independent twists.A 30° bulb lock and an 80° carrier lock keep the light accessible.
02 / FROM A PRINT BED TO YOUR MANTEL
A tall little lamp.
Three manageable prints.
Each part prints upright. Sloping tabs, locking tracks and an angled inner tip are designed to keep supports out of the build.
| The piece | On the print bed | Filament | Time |
|---|---|---|---|
| 01 Base + clip | 135 × 110 × 180 mm | 247 g | 9h 55m |
| 02 Bulb diffuser | 140 × 140 × 233 mm | 138 g | 5h 39m |
| 03 LED carrier | 70 × 70 × 17 mm | 13 g | 38m |
| One complete set | 398 g | 16h 12m | |
Estimates from a provisional Bambu P1S slicing check, with supports disabled. Final results depend on your printer, filament and settings. Physical print testing is still to come.
A solid little foundation.
Use a suitable PETG for the base and carrier. The initial check uses three walls and 15% gyroid infill. Print the base on its foot and the carrier on its flat bottom.
Let the colour glow.
Choose a light-transmitting filament for the bulb. Print it neck-down in normal mode, with three walls and solid infill where the shape thickens. Its 1.2 mm wall grows thicker at the neck and inner tip.
All three parts fit individually within a 256 mm cube. Keep them at the supplied scale so the LED and twist locks retain their fit.
03 / A SHORT HOLIDAY LIST
Gather a few things.
Make a little merry.
Check off what you have. Your list stays in this browser for your next visit.
04 / FROM PARTS TO EVERGLOW
A few pieces.
A couple of twists.
A little magic.
- 01Explore the pieces ↗
PRINT & CHECK
Start with the fit.
Test the short lock pieces first. Then print the three main parts upright at their supplied scale. Remove the brim and clean the mating edges without enlarging the tabs or grooves.
- 02Inspect the base ↗
ROUTE & PREPARE
Give the cable its space.
With the LED unplugged, feed its lead and inline parts down through the base and out through the bottom-open rear exit. Keep the puck above the base and leave enough slack to seat it later.
- 03Inspect the carrier ↗
LOWER & TURN
Lock in the little carrier.
Place the cable sideways into the empty carrier’s open sector. Align the two tabs with their loading gates, lower the carrier, and turn clockwise about 80° to its stop. Keep the cable in the rear channel.
- 04Look inside ↗
SEAT THE LIGHT
Settle the LED inside.
Place the puck face-up in the carrier’s pocket, gently flexing the three retaining fingers. Check that the cable sits in its clearance path and the puck is seated without force.
- 05Inspect the diffuser ↗
ONE LAST TWIST
Put the bulb on top.
Line up the diffuser’s two tabs with the outer loading gates, lower its neck into the collar, and turn clockwise about 30° to the stop. Reverse the turn whenever you need to open it.
- 06See it together ↗
CHECK & ENJOY
Find its festive corner.
Set the lamp on a stable indoor surface, reconnect the LED kit, and check fit and temperature during the first powered test. Enjoy the glow without hanging the lamp from its untested side clip.
This guide follows the prototype shown above. Final print profiles and physical testing will be completed before the production file release.
05 / BEFORE YOUR FIRST BUILD
A few details.
A happier holiday print.
Good to know before you pick your filament.
Is it really only three printed parts?
Yes. The side clip is part of the base, the bulb is the diffuser, and the LED carrier is the third print. The Bambu LED kit and USB supply are purchased hardware.
Does the bulb lock when I turn it?
Two tabs move under retaining shoulders during a 30° clockwise turn. Stops limit the travel, and small detents resist reverse turning. CAD checks are complete; the printed feel still needs testing.
Can I print it without supports?
That is the design intent. All three parts slice with supports disabled in the provisional check. Print them upright: base on its foot, bulb on its open neck, carrier on its flat bottom. A physical print is still needed to confirm the finish.
Which filament makes the best glow?
A translucent or light-transmitting filament is the starting point. Opaque red or green may block too much light. The preview is a colour study, not a prediction of filament brightness. The reinforced neck and thicker inner tip can appear darker.
Can I use vase mode or scale the STL?
Use normal slicing so the mounting neck, tabs and inner tip remain intact. Keep the STL at its supplied scale: scaling also changes the LED pocket and locking clearances.
Is the side clip for hanging the lamp?
It preserves the oversized Christmas-bulb character, but its flexibility and load capacity have not been tested. Treat this version as a tabletop lamp.
Are the print files available yet?
The editable prototype and fit samples are prepared. Public print files and final printer profiles will be linked here after physical validation. For now, explore the model and plan your colours.
A LITTLE IDEA. A REAL HOLIDAY THING.
Make room
for a little
merry.
Everglow brings a familiar festive shape to your next maker project. Choose your colours now. Come back for the finished files.
FROM THE WORKBENCH
Print files
coming soon.
The three-part prototype is built and digitally checked. Physical print testing and final profiles are in progress.
Explore more designs ↗Meet the Ripple Teardrop Lamp ↗Or bring home a tropical glow ↗